An extremely hard super hard stone with a snap-set effect (long working time). You can demould the die stone after 30 minutes and work on it. Hinristone® Saphir has a very creamy flowing property with a high thixotropy and low expansion. The extraordinary colours depend on special compounds which are scanable, absolutely homogenous and free from reams.
Recommendation: crown and bridge models, implant models, master models with precious/non-precious alloys, control models.
Technical Data
Instructions for use: Hand mix for 15 seconds then mechanically spatulate for another 30 seconds with vacuum.
Water/Powder Ratio 20 ml water/100g powder
Processing Time: 6 – 7 minutes Setting Time: 10 to 12 minutes
Setting Expansion %: 0.08
Compressive Strength After 1 Hour (MPa): 65
Compressive Strength Dry (MPa): 90
Recent Comments