Mayku – Multiplier multi unit pressure former

Up to 20 appliances in one pull – Large-format pressure forming for aligners, retainers, night guards, and bleaching trays. Run the full 428 mm bed, or swap in the 7-shot plate for your existing stock.

Go large, with the all-in-one pressure former built for modern labs – A large-format pressure former with an auto-levelling system, built-in compressor, and open-material compatibility. Three things make it different.

More per pull. – Up to 20 appliances on a 428 mm blank, or up to 7 with the included reducing plate. Cycle ≈ 4 minutes; hands-on time ≈ 30 seconds.

Consistent fit, every pull. – Temperature sensor and auto-levelling keep the sheet flat as it heats. No droop, consistent thinning, fewer remakes. One-tap replay of saved profiles.

Your materials, or ours. – 120 / 125 / 428 mm blanks. 0.1–5 mm thickness. PETG, EVA, or keep buying what you already use. Mayku sheets from $0.49/appliance.

Auto-levelling, every pull. – Temperature sensor and auto-levelling system keep the sheet perfectly flat as it heats. No drooping, no thinning, no remakes. Consistent fit across forms and across technicians.

Every standard sheet size. Every common material. – With the reducing plate, the Multiplier handles 120 mm, 125 mm, and 428 mm round blanks from 0.1 to 5 mm thick. PETG, EVA, and most other thermoformable sheets. Use Mayku stock or keep buying what you already use.

Your fit, saved and replayed. – Material profiles come pre-installed. Dial in a custom profile for your material and your fit, save it, replay it in one tap. Same result every batch, every technician.

Gets better after you buy it. – Connect to Wi-Fi for over-the-air firmware updates, new material profiles, and new machine functionality. The Multiplier on your bench in two years will do more than the one that arrived.

No shop air required. – The Multiplier has an internal compressor and an air-out port. No external air line, no shop compressor plumbing. Drop it on any benchtop and run.

Two ways to run it. – The Multiplier ships with both. Run the full 428 mm bed for volume, or swap in the 7-Shot Reducing Plate for smaller runs on your existing stock. No extra purchase. No changeover hassle. 428 mm Forming Bed

For volume. Full Mayku sheet. Up to 20 appliances per pull.

• Form up to 20 appliances at once
• Just PETG and Just EVA (428 mm circular blanks)
• 0.1–4 mm thickness
• Retainers, aligners, bleaching trays, night guards

7-Shot Reducing Plate for smaller runs. Your existing 120 / 125 mm stock. Up to 7 appliances per pull.

• Modular. 1 to 7 appliances at once
• All 120 mm and 125 mm circular blanks
• Lightning-fast magnetic loading
• 0.1–4 mm thickness
• Retainers, aligners, trays, night guards, mouth guards