Sale!

Programat – Accessories

£0.51£914.00 Excl VAT

Clear

Download Brochure
    Ivoclar Vivadent Heating Muffle, 220 V,for Programat P1/P10/P20/P90/P95/EP500 – Ref: 530660
    Ivoclar Vivadent Heating Muffle, 240 V – Ref: 536415
    Ivoclar Vivadent Firing Muffle, 118 V – Ref: 536418

    The temperature checking set is used to check and adjust the temperature in the Programat furnace chamber.  Temperature Checking Set 2 – Ref: 544903

    Automatic Temperature Checking Set 1 – Ref: 559358

    Automatic Temperature Checking Set 2 – Ref: 598833

    Sound Absorber Type P – Ref: 561756

    Firing Table – Ref: 563785

    Resistance (R513) V-Board P200 – Ref: 591147

     

     

    QTK Heating Muffle cpl. 200-240v – Ref: 597130

    Motor Lever cpl. – Ref: 597128

    Fastening screw set – Ref: 597127

    Basic Arch Lower cpl. – Ref: 597121

    Basic Arch Upper cpl. – Ref: 597120

     

     

    IPS Investment Ring System Starter Kit

    The IPS Investment Ring System 300 g Starter Kit includes all components necessary for pressing on large-span restorations or on several smaller restorations.

    It is suitable for pressing on zirconium oxide frameworks (using IPS e.max ZirPress) and metal frameworks (IPS InLine PoM).

    • IPS Ring Base 300g
    • IPS Ring Gauge 300g
    • IPS Silicone Ring 300g
    • One-Way-Plunger 300g (28 mm)
    • IPS Ingot Tongs
    • IPS Sprue Guide 300g

    IPS Investment Ring System 300g Starter Kit – Ref: 614491
    IPS Investment Ring System 300g – Ref: 614490

    The support pins can be used for the Programat firing tray and can be mounted to the honeycomb firing tray if required.

    Programat Firing Tray Metal Pins A, B,C – Ref: 626698

     

     

    Temperature calibration set for S1 sintering oven – Ref: 627380

     

    The sinter tray fork is used to place the sinter tray inside the sintering chamber. Its shape has been precisely adjusted to fit the Programat S1 sinter tray.

    Sinter Tray Fork S1 – Ref: 627988

    Sinter Tray S1 – Ref: 627987

     

    Programat Tongue Holder x 10  – Ref: 655945

     

    Programat Firing Tray Kit 2  – Ref: 655946  Specially developed for the Programat ovens. The support pins can be mounted individually in the firing tray as required.

    • 12 support pins (A, B)
    • 2 fan pins
    • 2 ceramic tubes
    • Hobbyceram pin

     

    Programat Cooling Tray for P510/P710  – Ref: 663592

    Programat SiC firing table  – Ref: 664139

    Programat SiC pressing plate  – Ref: 666839

    Ceramic Sleeves for Metal Pins (refill) – Ref: 666068

    Patient information denture care leaflet – Ref: 666171

     

     

    Vacuum Pump VP5 200v – 240v – Ref: 6661308  The high-performance vacuum pump VP5 was specially developed for the Ivoclar Vivadent kilns and press furnaces. It is characterised by a very high conveying capacity and impresses with its clear design and a handle for easy transport.

     

    Vacuum Pump Filter Kit – Ref: 680188

     

     

     

     

    Additional information

    Ivoclar Muffle

    Automatic Temperature Checking Set 1, Automatic Temperature Checking Set 2, Basic Arch Lower cpl, Basic Arch Upper cpl., Ceramic Sleeves for Metal Pins, Fastening screw set, Firing Table, IPS Investment Ring System 300g, IPS Investment Ring System 300g Starter Kit, Ivoclar Vivadent Firing Muffle, 118 V, Ivoclar Vivadent Heating Muffle, 220 V, Ivoclar Vivadent Heating Muffle, 240 V, Motor Lever cpl., Patient information denture care leaflet, Programat Cooling Tray, Programat Firing Tray Kit 2, Programat Firing Tray Metal Pins A, B,C, Programat SiC firing table, Programat SiC pressing plate, Programat Tongue Holder, QTK Heating Muffle cpl. 200-240v, Resistance (R513) V-Board P200, Sinter Tray Fork S1, Sinter Tray S1, Sound Absorber Type P, Temperature calibration set for S1, Temperature Checking Set 2, Vacuum Pump Filter Kit, Vacuum Pump VP5