SR Ivocap Injection System The SR Ivocap System permits the impeccable fabrication of highly accurate methyl methacrylate-based dentures. The material mixed in the capsule is injected into the closed flask under pressure. Constant pressure is applied during polymerisation. As the denture base material flows consistently, the shrinkage of the material is optimally compensated.
Advantages
- No increase in vertical dimensions
- Homogeneous denture base
- Optimally coordinated equipment components
SR Ivocap Pressure App – Consistent pressure enables controlled injection-moulding of the denture base material. This technique ensures continuous shrinkage compensation. Maximum operating pressure 6.5 bar. 2 Kg
SR Ivocap Pressure App. – Ref: 530610
SR Ivocap Clamping Press – The high clamping forces (3 tons) exerted on the flask prevent increases in vertical dimension. 2.3 Kg
SR Ivocap Clamping Press – Ref: 530612
SR Ivocap Flask – The special thermal insulators ensure the compensation of polymerisation shrinkage. 1.3 Kg
SR Ivocap Flask – Ref: 530613
SR Ivocap Timer – Ref: 530614
SR Ivocap Injecting Funnels 50 – Ref: 530615
SR Ivocap Plastic Floats – 1000 – Ref: 530633
SR Ivocap® Cap Vibrator Thorough mixing helps dissolve the polymer in the monomer quickly and cleanly
Polymerisation Bath – The excellent material properties are the result of heat polymerisation in the polymerisation bath.
Polymerisation Bath – Ref: BDT10033
Compression spring set – Ref: 530620
Recent Comments